BF109 Throttle 1.1

BF109 Throttle with Governor Switch

This is the highly featured Messerschmitt BF109 throttle, compatible with both the DCS 109 as well as the MSFS 109 and Il-2 Great Battles series 109s. It includes fully functional pitch lever, 4 position pump lever and engine lever as well as including the governor switch.

  • Smooth throttle with hydraulic damping and hall sensors
  • Pitch control lever
  • Four position pump lever with strong detents
  • Engine on/off (for compatible 109 versions)
  • Governor switch
  • PTT Switch

This download contains the following items:

  1. All 3D printable CAD files (in STL or 3MF) format required to print the parts for the throttle quadrant
  2. Wiring diagram
  3. Bill of Materials - other hardware parts (bearings, screws etc) you will need
  4. Assembly steps
  5. An inventory of the screws so you can cross check which screw size is used where

The throttle mounts to the primary rig system using Rig Extension A which is included in the Spitfire MkIX Add On Kit B or is available separately. It connects to your PC via the Universal Hub and uses the throttle input H2 along with H7 and H9.

This is the main assembly video but see the documentation for supporting videos.

External Content
Content embedded from external sources will not be displayed without your consent.
Through the activation of external content, you agree that personal data may be transferred to third party platforms. We have provided more information on this in our privacy policy.

  • Version 1.1

    v1.1 Released 7th July 2023


    * Fixed ThrottleMaghallLever (new version V2.4.4)

    * Fixed PTTClip (new version V1.2)

    * Updated batch-3-black-cura and batch-3-black-prusa accordingly (v1.1)

    * Updated batch-6-silver-cura and batch-6-silver-prusa accordingly (v1.1)

  • Version 1.0

    BF109 Throttle v1.0 -- Official release

  • Tolles Ding! Sehr schöne Arbeit, vielen Dank :!: :) :) :Daumen hoch: Da habe ich lange darauf gewartet. Ich werde gleich anfangen zu drucken. Ich hoffe noch auf einen Steuerknüppel für die Messerschmidt. Leider kann ich selbst nicht so gut 3D konstruieren, aber das Instrumentenbrett würde ich dann, ohne Drucker, als nächstes bauen.

  • Beautiful work!! But the 'BackPlate' and 'FrontPlate' won't fit on cr6-se print space. This is the first time, for me, any other prints will fit just ok. Am I doing something wrong?

    • Update :) I have replaced Cura 5.2 with 5.3 and now will fit just fine !

      Like 1
    • Great that you managed to sort it out! Everything fits on an Ender 3 V2 (which should be equivalent to CR6-SE) bed even if it means that you might need to tweak the keep out areas a little bit. Happy printing and assembly!