AuthentiKit Downloads
This is the new download section of the AuthentiKit community freeware project. We had over 16,000 downloads from the old site and it was time for something fit the future expansion of the AuthentiKit range. If you need files to 3D print you will find them here, as well as assembly and wiring guides - all free of course. If you don't have a 3D printer here are some options.
Are you a total beginner? Wouldn't know a 3D printer if you tripped over one? Try this total beginner's overview video of AuthentiKit by SimHanger.
Recent Activities
-
Harepath
Uploaded the image Modified Throttle lever for Spitfire IX.Image/Video -
Harepath
PostProduced many calibration widgets before proper prints and found that on the Bambu P1S, to get the ATK loose fit spec it needed +.05 hole compensation to fit the outside of the bearing but also +.03 (not minus) to fit the inside.
Not a case of "heavily"… -
Administrator
PostThanks for the info. Could well be a calibration issue actually as torquing the screws heavily should never be needed. -
Administrator
Reacted with to Harepath’s post in the thread Chassis Lever - Hydraulic state Indicator sticks when lever arm spring is installed - Resolved.Reaction (Post)Spent hours investigating the cause of this with multiple frustrating dis/reassemblies and tinkering not curing the problem.
The symptoms in more detail
At step 27 with the indicator installed, check the function and everything works perfectly, up and down… -
Harepath
ThreadSpent hours investigating the cause of this with multiple frustrating dis/reassemblies and tinkering not curing the problem.
The symptoms in more detail
At step 27 with the indicator installed, check the function and everything works perfectly, up and down… -
Administrator
Replied to a comment by Ralgernok on the file Spitfire Rudder Pedals.Reply (File)Nothing purpose made but a Construction Kit 1&2 should do it -
Ralgernok
Commented on the file Spitfire Rudder Pedals.Comment (File)Is their a pack available with all necessary screws/parts? -
Administrator
Marked Administrator’s post in the thread Shattering Roll Pin Retain - Trying to print in resin as the best answer.Best AnswerAhhh, resin. I just don't think it has the strength for this part. Do you have an FDM printer too? If it's just for this part someone in the community might print a few small parts for you. It could explain your difficulties with the screw thread too.
… -
Administrator
Marked Administrator’s post in the thread P-51D Throttle Mixture Axis not working in DCS as the best answer.Best AnswerThe latest download includes a PDF explaining the mixture lever mapping for DCS in detail. -
Administrator
Replied to the thread P-51D Throttle Mixture Axis not working in DCS.PostThe latest download includes a PDF explaining the mixture lever mapping for DCS in detail.